There are some hoses available in the market which comes with a no crank operation. The advantage of these hose reels is that the hose can be wrapped with just the force of water. This not only saves time but it also saves a lot of efforts. Some of the components of this include a hose stopper, drain hose and a spigot. It is quite easy to use such systems and in this article, we have listed the procedure to use the system properly. Also see the list for the Best Garden Hose Reel available online.
Using the hose Reel System
Step 1: On the reel side, you would notice a spigot or a leader hose. You need to turn this in a clockwise direction. Before you do this, ensure that you have attached the other side of the hose on the spigot.
Step 2: Now attach the drain hose with the reel’s drain as this would drain the stored water from the hose. It is usually located on the side of the hose reel.
Step 3: This is quite an important step and in this step, you would have to push the hose through the hose guide and this would basically help in the reeling operation. You will be able to figure out the step after you look at the apparatus.
Step 4: All you have to do here is that you have to pull the hose while you are turning the drum with one hand. Keep turning it until the drum connector appears again. Once this is done, you can twist the stopper on the garden hose.
- Read Here: Best Garden Hose Reviews You Should Check Once
Step 5: Find the operation lever and keep it on off or rest position while you are storing the hose. You can turn the spigot while you wish to use the hose.
Step 6: If you turn the lever to rewind, the hose will automatically reel in.
These were the complete instructions to use the hose reel and you will be able to understand it better while you are using it.
